Cisco Cisco UCS B460 M4 Blade Server Data Sheet
Cisco UCS B200 M4 Blade Server
52
SUPPLEMENTAL MATERIAL
Upgrade and Servicing-Related Parts
This section lists the upgrade and servicing-related parts you may need during the life of your UCS B200 M4
server. Some of these parts are configured with every server or with every UCS 5108 blade server chassis,
and some may be ordered when needed or may be ordered and kept on hand as spares for future use. See
server. Some of these parts are configured with every server or with every UCS 5108 blade server chassis,
and some may be ordered when needed or may be ordered and kept on hand as spares for future use. See
Drive and Blade Server Blanking Panels
A drive blanking panel (UCSB-LSTOR-BK=) must be installed if you remove a disk drive from a UCS server.
Similarly, a blade server blanking panel (N20-CBLKB1=) must be installed if you remove a half-width blade
server (such as a UCS B200 M4 server) from a blade server chassis. If no FlexStorage RAID controller module
or FlexStorage Passthrough Module (used in B200 M4 for VVMe-based PCIe SSD support) is used, the
FlexStorage blanking panels (UCSB-LSTOR-BK=) must be installed. Two panels are used for servers with two
drive bay openings. These panels are required to maintain system temperatures at safe operating levels,
and to keep dust away from system components.
Similarly, a blade server blanking panel (N20-CBLKB1=) must be installed if you remove a half-width blade
server (such as a UCS B200 M4 server) from a blade server chassis. If no FlexStorage RAID controller module
or FlexStorage Passthrough Module (used in B200 M4 for VVMe-based PCIe SSD support) is used, the
FlexStorage blanking panels (UCSB-LSTOR-BK=) must be installed. Two panels are used for servers with two
drive bay openings. These panels are required to maintain system temperatures at safe operating levels,
and to keep dust away from system components.
Table 29 Upgrade and Servicing-related Parts for UCS B200 M4 Server
Spare Product ID (PID)
Description
UCSB-LSTOR-BK=
2.5-inch HDD Blanking Panel
1
Notes...
1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of
your server).
N20-CBLKB1=
Blade slot blanking panel for UCS 5108/single slot
2
2. This part is included/configured with the UCS 5108 blade server chassis.
UCSB-HS-EP-M4-F=
CPU Heat Sink for UCS B200 M4 socket 1 (front)
1
UCSB-HS-EP-M4-R=
CPU Heat Sink for UCS B200 M4 socket 1 (rear)
1
UCS-CPU-LPCVR=
CPU load plate dust cover (for unpopulated CPU sockets)
UCSB-BAFF-B200-M4=
Air Baffle Replacement Kit for B200 M4 Server
1
N20-MBLIBATT=
Replacement Lithium Battery for Server Motherboard (CR2032)
1
N20-BKVM=
KVM local IO cable for UCS servers console port
2
UCS-CPU-GREASE3=
CPU thermal grease syringe - needed for heatsink seal
3
3. This part is included with the purchase of each optional or spare Intel Xeon E5-2600 v3 or CPU processor kit.
UCSX-HSCK=
UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)
3
UCSB-GPU-M6=
4
http://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-b-series-blade-servers/products-i
nstallation-guides-list.html
nstallation-guides-list.html
UCS Blade Server M6 GPU - GRID 2.0 SW required for VDI