Cisco Cisco TelePresence Management Suite (TMS) Version 15 Release Notes
Resolved issues
Cisco TMS Release Notes (14.3)
Page 32 of 43
Systems Management
Identifier
Description
CSCtz83514
Resolved the issue where it was not possible to add Cisco TelePresence MX300, Profile 55 and
SX20 systems which were registered to a Cisco Unified CM to Cisco TMS.
SX20 systems which were registered to a Cisco Unified CM to Cisco TMS.
CSCua52567
Cisco TMS now downloads software and release keys for provisioned systems.
CSCua52587
Resolved the issue where enforcing management settings on a Cisco VCS in Cisco TMS
changed the external manager address set on the Cisco VCS from the FQDN of the Cisco TMS
to the IP address of the Cisco TMS.
changed the external manager address set on the Cisco VCS from the FQDN of the Cisco TMS
to the IP address of the Cisco TMS.
CSCua65556
Resolved the issue where it was not possible to add systems to Cisco TMS if the default ISDN or
IP Zone value had been set to None in
IP Zone value had been set to None in
Administrative Tools > General Settings >
Default
ISDN/IP Zone after initially creating the default zones during the install process. A “System not
found!” error was invoked.
found!” error was invoked.
CSCua26092
Resolved the issue where changing the URL Where Software Packages Can Be Downloaded:
in
in
Administrative Tools > Configuration > Network Settings > General Network Settings
could cause a stack trace error when accessing the
Systems > System Upgrade > Software
Manager
page.
This happened if the IIS user Cisco TMS was running under did not have access to the folder
specified.
specified.
A valid error message will now appear.
CSCua26087
Removed the field SNMP Get Community Name: from
Systems > Navigator >
Select a system
> Connection
tab for systems which do not support this setting, for example Cisco Unified CM
and Cisco TelePresence Server.
CSCua59944
Resolved the issue where no system name was displayed for systems which did not have a
name. This occurred in
name. This occurred in
Systems > Event Notification Manager >
edit an account in the Name
column. Select a system with No Name in the Select Systems column, and an event type in the
Select Event Types column, then click on the arrow to move it into the Stored Event
Notifications column and click Save. Now view the same account in
Select Event Types column, then click on the arrow to move it into the Stored Event
Notifications column and click Save. Now view the same account in
Systems > Event
Notification Manager
. Nothing is displayed in the System column for the system name.
CSCtr25908
Resolved the issue where endpoints running TC and TE software, and the Cisco VCS showed
the SNMP port as 0 instead of 161 in
the SNMP port as 0 instead of 161 in
Systems > System Overview >
Select a system from the
Systems folder list and SNMP Settings from System Parameters list
>
click View
>
SNMP port
column.
This is a hard-coded value in Cisco TMS, it is not read from the system itself.
Phone Books
Identifier
Description
CSCua67525
Resolved the issue where incorrect data could be returned when searching via the
View
Contacts
tab in an Active Directory or H.350 Phone Book Source.
CSCua60451
Resolved an issue where if there were lots of phone book contacts without any contact
information, deletion of one manual contact could fail with an exception due to a time-out.
information, deletion of one manual contact could fail with an exception due to a time-out.
CSCua59896
Resolved an issue where synchronizing very large phone books could fail with an exception
due to a time-out.
due to a time-out.