Cisco Cisco TelePresence MX700 Maintenance Manual
Cisco TelePresence Endpoints running TC5 and Cisco Unified Communications Manager 8.6
Quick Reference Guide
D14878.06 Administering TC5 Endpoints on CUCM 8.6, January 2013.
www.cisco.com — Copyright © 2013 Cisco Systems, Inc. All rights reserved.
10
Setting up provisioning
(continued...)
About the External Manager address
If the network does not offer DHCP Option 150, the External
If the network does not offer DHCP Option 150, the External
Manager Address must be added manually. Note that any
input in the field will override the setting provided by DHCP.
When the infrastructure is set to Cisco UCM; then CDP (Cisco
Discovery Protocol) will be enabled and if CDP is successful,
the endpoint will discover DHCP Option 150. In this case you
can leave the External Manager Address field blank, as the
DHCP server will provide the address automatically.
Setting up provisioning
When logged on to the endpoint through the command line
When logged on to the endpoint through the command line
interface, run the following commands:
1. Configure the provisioning
xConfiguration Provisioning Mode:
[must be CUCM]
xConfiguration Provisioning ExternalManager
xConfiguration Provisioning ExternalManager
Address: [CUCM cluster TFTP server address]
xConfiguration Provisioning ExternalManager
xConfiguration Provisioning ExternalManager
Protocol: [must be HTTP for UCM mode]
xConfiguration Provisioning LoginName:
xConfiguration Provisioning LoginName:
[leave blank, it is not needed for UCM mode]
xConfiguration Provisioning Password:
xConfiguration Provisioning Password:
[leave blank, it is not needed for UCM mode]
xConfiguration Provisioning HttpMethod:
xConfiguration Provisioning HttpMethod:
[both GET and POST work in UCM mode]
xConfiguration Provisioning ExternalManager
xConfiguration Provisioning ExternalManager
Path: [leave blank, it is not needed for UCM mode]
xConfiguration Provisioning ExternalManager
xConfiguration Provisioning ExternalManager
Domain: [leave blank, it is not needed for UCM mode]
API
WEB
Setting up provisioning
When logged on to the endpoint through the web interface,
When logged on to the endpoint through the web interface,
go to the
Configuration
tab and choose
Advanced
Configuration
, then choose
Provisioning
from the left sidebar.
1. Configure the provisioning
a. Go to
Provisioning
section and set
Mode
to
CUCM
.
Click
ok
to save the changes.
b. Go to the
ExternalManager
section and the IP address
or DNS name of the External Manager of the Cisco
UCM cluster TFTP server in the
Extermal Manager
input field. Click
ok
to save the changes.
Contents
Introduction
Endpoint configuration
CUCM configuration
Setting passwords
Appendices
Endpoint configuration