Cisco Cisco TelePresence Management Suite (TMS) Version 15
Introduction
To begin using CMR Hybrid, you must configure the call control product(s) used in your video network.
There are four possible call control scenarios:
n
Cisco Cisco Unified Communications Manager with Cisco Expressway-C and Cisco Expressway-E.
Endpoints are registered and bridges are trunked to Unified CM only.
Endpoints are registered and bridges are trunked to Unified CM only.
n
Cisco VCS Control and Cisco VCS Expressway
Endpoints are registered to Cisco VCS Control and/or Cisco VCS Expressway only and bridges are
registered to Cisco VCS Control only.
Endpoints are registered to Cisco VCS Control and/or Cisco VCS Expressway only and bridges are
registered to Cisco VCS Control only.
n
Cisco Unified Communications Manager with Cisco VCS Control and Cisco VCS Expressway
Endpoints are registered to Unified CM only and bridges are registered to Cisco VCS Control only.
Endpoints are registered to Unified CM only and bridges are registered to Cisco VCS Control only.
n
Cisco VCS Control and Cisco VCS Expressway with Unified CM
Endpoints are registered to Cisco VCS Control/Expressway and Unified CMonly and bridges are
registered to Cisco VCS Control only.
Endpoints are registered to Cisco VCS Control/Expressway and Unified CMonly and bridges are
registered to Cisco VCS Control only.
Note: Using Unified CM as the call control solution requires either Cisco Expressway-C and Cisco
Expressway-E or Cisco VCS Control and Cisco VCS Expressway to be deployed in order to communicate
with WebEx, regardless of whether endpoints are registered to Unified CM or Cisco VCS.
Expressway-E or Cisco VCS Control and Cisco VCS Expressway to be deployed in order to communicate
with WebEx, regardless of whether endpoints are registered to Unified CM or Cisco VCS.
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.4 - WebEx WBS29)
Page 60 of 186
Configuring Call Control
Introduction