Cisco Cisco TelePresence Management Suite (TMS) Version 15
Installing the SSL Server Certificate on the Cisco
Expressway-E or Cisco VCS Expressway
Expressway-E or Cisco VCS Expressway
Note: Before installing the server certificate on the Cisco Expressway-E or Cisco VCS Expressway, make
sure it is in the .PEM format. If the certificate you received is in a .CER format, you can convert it to a .PEM
file by simply changing the file extension to .PEM.
sure it is in the .PEM format. If the certificate you received is in a .CER format, you can convert it to a .PEM
file by simply changing the file extension to .PEM.
CAUTION:
The server certificate must not be stacked along with the root or intermediate CA Certificates.
To install the SSL server certificate on the Cisco Expressway-E or Cisco VCS Expressway, do the
following:
following:
1. (Recommended) Open the server certificate in a text editing application such as Notepad and verify that
you see a single certificate (noted by Begin and End Certificate brackets).
You may also want to verify that the validity of the server certificate by opening it as a .CER file. Here you
should observe that the Issued to field is that of the Cisco Expressway-E or Cisco VCS Expressway
server.
should observe that the Issued to field is that of the Cisco Expressway-E or Cisco VCS Expressway
server.
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.4 - WebEx WBS29)
Page 76 of 186
Configuring Certificates on Cisco Expressway-E and Cisco VCS Expressway
Installing the SSL Server Certificate on the Cisco Expressway-E or Cisco VCS Expressway