Cisco Cisco IPCC Web Option Installation Guide

How to Configure the Rolm 9005 PIM

In the Rolm 9005 Configuration, to put the PIM into service, check the Enabled option. This
allows the PIM to communicate with the peripheral when the Peripheral Gateway is running.

In the Peripheral name field, enter the Peripheral name from the Configuration Manager (use
the PG Explorer tool to view the Peripheral name).

In the Peripheral ID field, from the Peripheral record, enter the Peripheral ID value from the
Configuration Manager (use the PG Explorer tool to view the Peripheral ID).

Enter the Revision number of the ACD.

In the Supervisor Terminal Settings section, enter the login ID (Supervisor user ID) and
password (Supervisor Password) that the PG will use to connect to the ACD's Supervisor
terminal port.

Enter the number of the First COM port on the PG through which the PG communicates with
the Supervisor terminal interface and the total number of COM ports (Num COM Ports) the
PG uses.

In the COM Port Setting section, specify the Idle timeout and Wait timeout values in
milliseconds.

Specify the Baud rate and Parity for the COM ports.

How to Configure the Siemens Hicom PIM

In the Siemens 9751 Configuration dialog box, to put the PIM into service, check the Enabled
option. This allows the PIM to communicate with the peripheral when the Peripheral Gateway
is running.

In the Peripheral name field, enter the Peripheral name from the Configuration Manager (use
the PG Explorer tool to view the Peripheral name).

In the Peripheral ID field, from the Peripheral record, enter the Peripheral ID value from the
Configuration Manager (use the PG Explorer tool to view the Peripheral ID).

In the CallBridge host name field, enter the TCP/IP host name for the CallBridge for
Workgroups connection on the ACD.

In the CallBridge connection port field, enter the port number for the connection (1040 by
default).

ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)