Brother HL-1870N User Guide

CHAPTER 13 TROUBLESHOOTING 

13-10

 

 
If you are having trouble printing on a Windows 95/98/Me Peer-to-Peer network, 
check the following (HP JetAdmin compatible method): 

 

1.  If the print server does not show up under JetAdmin on a Windows 

95/98/Me Peer-to-Peer network, try removing all of the Windows 
95/98/Me network software from the Network Control panel and then 
reinstalling them as follows: 

 

• 

First install the IPX/SPX-Compatible Protocol (or the TCP/IP 
protocol if you are using a later version of JetAdmin), the Client for 
Microsoft Networks, and the network adapter card driver. 

• 

Install the Latest HP JetAdmin software 

• 

Restart the system, and then add the HP JetAdmin service. 

 
 
 

 
If you are having trouble printing on a Windows 95/98/Me/NT 4.0 (or later) 
Peer-to-Peer network (NetBIOS), check the following: 

 

1.  Make sure that the Brother NetBIOS Port driver is securely installed and 

configured according to the Windows 95/98/Me/NT 4.0 Peer-to-Peer 
(NetBIOS) chapters. You may find that during the installation of the port 
driver, the screen that prompts you for a Port name is not displayed. This 
happens on some Windows 95/98/Me/NT 4.0 computers. Press the ALT 
and TAB keys to make it appear. 

 

2.  Make sure that the print server is configured to be in the same 

workgroup or domain as the rest of your computers. It may take several 
minutes for the print server to appear in the network neighborhood.