Brother HL-1870N User Guide

CHAPTER 6 NOVELL NETWARE PRINTING 

6-6

 

 

1.  Make sure that you logged in as SUPERVISOR (NetWare 2.xx or 3.xx) 

or ADMIN (NetWare 4.xx or later). 

2. Start 

BRAdmin. 

3.  One or more print server will appear in the list (the default node names 

are BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet 
address (MAC address)).  

 
You can find the node name and MAC address by printing out the printer 
configuration page. Refer to the User’s Guide for information on how to printer 
the configuration page on your print server. 
 

4.  Select the print server that you wish to configure and double click it. 

You will be asked for a password. The default password is  "access". 

5.  Select the NetWare tab.  

 
If necessary change the "Print Server Name", the default NetWare print server 
name will usually be BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of 
the print server. Be careful! Changing the name may impact the configuration of 
other protocols because the print server service names will be altered.  

 
a. 

If it is not already selected, select Queue Server mode.  

b. 

Click the Change Bindery Queues button. 

c. 

Select the NetWare server which you wish to configure. 

d. 

Select the New Queue button and type in the queue name which you 
wish to create. 

e. 

Once you have done that highlight the queue name you created and 
click on the Add button. 

f. 

Click on Close and then OK. 

 
Now exit the BRAdmin application. You are ready to print.