Brother HL-1870N User Guide

CHAPTER 6 NOVELL NETWARE PRINTING 

6-8

 

 
If you do not wish to use the Brother BRAdmin application solely to configure 
your NetWare file server, use the following instructions for configuration using 
the NWADMIN application in conjunction with the BRAdmin application. 
 

1.  Make sure that you are logged in as ADMIN in NDS mode on the 

NetWare 4.1x (or later) file server and start the NWADMIN application. 

2.  Select desired Context that will contain the Printer and then click on 

Object from the menu bar and then Create. When you get the New 
Object menu, select Printer and then OK.   

3.  Enter the name of the printer and select Create. 
4.  Select the desired Context that will contain the default print queue, and 

then click on Object and Create to get New Object menu.   

5.  Select Print Queue and then OK. Make sure that Directory Service 

Queue is selected and then type in a name for the default print queue. 

6.  Click on the button to select the print queue volume. Change the 

directory context if necessary, then select the desired volume (from 
Available Objects) and click OK. Click Create to create the print queue. 

7.  Change context if required and then double click the name of the printer 

you created in step 3. 

8.  Click Assignments and then Add. 

 
Change the context if necessary and select the print queue you created in step 5.  

 
9.  Click Configuration and set the Printer type to Other/Unknown. Click 

OK and then OK again.  

10.  Change the context if required, select Object from the menu bar and then 

Create. When you get the New Object menu, select print server and then 
OK.   

11.  Enter the name of the print server and select Create.