Brother DCP-8080DN Quick Setup Guide
5
4
Release the scanner lock
a
Push the lever
a
in the direction shown to
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover
(The gray scanner lock lever is located at the
back left side, under the document cover
b
.)
5
Connect the power cord
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
the power switch on.
6
Choose your language
(If needed)
a
Press Menu.
b
Press 1.
c
Press 0.
d
Press
or
to choose your
language.
Press OK.
Press OK.
e
Press Stop/Exit.
7
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
changing the contrast setting.
a
Press Menu.
b
Press 1.
c
Press 5.
d
Press
to increase the contrast.
—OR—
Press
to decrease the contrast.
Press OK.
e
Press Stop/Exit.
IMPORTANT
DO NOT connect the interface cable yet.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
2
1