Samsung RF67DERS User Manual
18_
setting up
18_
setting up
REASSEMblING ThE FREEzER dOOR (dRAWER TYpE)
1. Pull out the rails to the full
length on each sidle of the
cabinet evenly.
cabinet evenly.
2. Hang the freezer door
front onto open slot on the
sides.
sides.
3. With the 10mm wrench,
reattach 4 bolts to connect
the rail with the door.
the rail with the door.
4. Replace the drawer box.
REASSEMblING ThE FREEzER dOOR (SWING TYpE)
1. Place the hole in the
bottom of the freezer door
over the right side low
hinge.
over the right side low
hinge.
2. Replace the middle hinge connected to the freezer.
3. Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
4. Replace the cap on the middle hinge.
Slot
DA68-01868P.indb 18
2010.6.29 2:30:20 PM