Samsung Digital Display Single Wall Oven User Manual

Page of 156
24  English
Oper
ating the o
v
en
Operating the oven
Before using the racks
Each rack has stops that need to be placed correctly on the supports. These stops 
will keep the rack from coming completely out.
REMOVING THE RACKS
1. 
Pull the rack straight out until it stops.
2. 
Lift up the front of the rack, and then pull it out.
REPLACING THE RACKS
1. 
Place the end of the rack on the support.
2. 
Tilt the front end up and push the rack in.
CAUTION
• 
Do not cover a rack with aluminum 
foil or place aluminum foil on the 
oven bottom. This will hamper heat 
circulation, resulting in poor baking, 
and may damage the oven bottom.
• 
Arrange the oven racks only when the 
oven is cool.
Using the Gliding Rack
The fully extendable Gliding Rack makes food preparation easier, especially when 
you are preparing heavier dishes. The Gliding Rack has 2 glide tracks that allow 
you to extend the rack well out of the oven without touching the sides of the oven 
walls.
Installing the Gliding rack
Rack 
Guides
• 
With the Gliding Rack in the "Closed" 
position and the oven off, carefully 
insert the Gliding Rack between the 
guides until the rack reaches the back.
• 
When using the Gliding Rack in the 
oven, be sure to pull on the handle of 
the rack only to slide it in and out. If 
you grasp the frame while using the 
rack, the entire Gliding Rack will be 
removed. Make sure you use oven mitts 
when handling the Gliding Rack during 
cooking.
NV51K6650S_DG68-00855A-00_EN+MES+CFR.indb   24
2016-08-17     11:22:27