Samsung 蓝光播放器BD-J5500 User Manual
Auto upgrade Notification
If you have connected the player to your
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software
version is available for the player.
To set Auto Upgrade Notification
on, follow these steps:
1. Select Auto upgrade Notification,
and then press the v button.
2. Use the ▲▼ buttons to select on,
and then press the v button.
If there is a new software version
available, the player notifies you
with a popup message.
1. To upgrade the firmware,
1. To upgrade the firmware,
select yes in the Pop-up. The
player turns off automatically,
then restarts, and begins the
download. (Never turn the
player on or off manually during
an upgrade.)
2. The update progress popup
appears.
3. When the update is completed,
the player will turn off
automatically.
✎
NotES
`
The upgrade is complete when the
player turns off, and then turns on
again by itself.
`
Never turn the player off or on
manually during the update process.
`
Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade.
Contact Samsung
Provides contact information for
Provides contact information for
assistance with your player.
terms of Service Agreement
Lets you view the general disclaimer
terms of Service Agreement
Lets you view the general disclaimer
regarding third party contents and
services.
Reset
Returns all settings to their factory
Reset
Returns all settings to their factory
defaults except for the network
settings.
Media Play
Playing a Commercially
Recorded Disc
1. Press the 8 button to open the
disc tray.
2. Place a disc gently into the disc tray
with the disc's label facing up.
3. Press the 8 button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB Device
There are two methods you can use to
play or view multimedia files located on
a USB device through your player.
Method 1
1. Turn the player on.
Method 1
1. Turn the player on.
2. Connect the USB device to the USB
port on the front panel of the player. The
New Device Connected pop-up
appears.
App 1 App 2
Change Device Settings
PLAY DISC
PHOTOS
VIDEOS
MUSIC
No Disc
New device connected.
Photos
Videos
Music
Videos
Music
123
>
Move " Enter ' Return
✎
NotES
`
If the pop-up does not appear, go to
Method 2.
3. Use the ▲▼ buttons to select photos,
Videos, or Music, and then press the
v
button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
✎
NotES
`
Even though the player will display folders
for all content types, it will only display files
of the Content Type you selected in Step
3. For example, if you selected music, you
will only be able to see music files. You can
change this selection by returning to the
Photos, Videos & Music screen and going
to Step 3 in Method 2 below.
4. If necessary, use the ▲▼◄►
buttons to select a folder, and then
press the v button.
5. Select a file to view or play, and then
press the v button.
6. Press the 返回 button to exit a folder
or the 退出 button to return to the
Home screen.
7. Go to pages 18~20 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Method 2
1. Turn the player on.
1. Turn the player on.
2. Connect the USB device to the
USB port on the front panel of the
player. Select Change device and
then press the ▲▼ button to select
uSB. Press the v button.
17