Samsung 蓝光播放器BD-J5500 Manuel D’Utilisation

Auto upgrade Notification
If you have connected the player to your 

network, and then set Auto Upgrade 

Notification on, the player automatically 

notifies you when a new software 

version is available for the player.

To set Auto Upgrade Notification 

on, follow these steps:

1.  Select Auto upgrade Notification, 

and then press the v button.

2.  Use the ▲▼ buttons to select on, 

and then press the v button.

If there is a new software version 

available, the player notifies you 

with a popup message.
1.  To upgrade the firmware, 

select yes in the Pop-up. The 

player turns off automatically, 

then restarts, and begins the 

download. (Never turn the 

player on or off manually during 

an upgrade.)

2.  The update progress popup 

appears. 

3.  When the update is completed, 

the player will turn off 

automatically.

 

✎

NotES

 `

The upgrade is complete when the 

player turns off, and then turns on 

again by itself. 

 `

Never turn the player off or on 

manually during the update process.

 `

Samsung Electronics takes no legal 

responsibility for player malfunction 

caused by an unstable Internet 

connection or consumer negligence 

during software upgrade.

Contact Samsung
Provides contact information for 

assistance with your player.
terms of Service Agreement
Lets you view the general disclaimer 

regarding third party contents and 

services.
Reset
Returns all settings to their factory 

defaults except for the network 

settings.

Media Play

1.  Press the 8 button to open the 

disc tray.

2.  Place a disc gently into the disc tray 

with the disc's label facing up.

3.  Press the 8 button to close 

the disc tray. Playback starts 

automatically.

There are two methods you can use to 

play or view multimedia files located on 

a USB device through your player.
Method 1
1.  Turn the player on.

2.  Connect the USB device to the USB 

port on the front panel of the player. The 

New Device Connected pop-up 

appears. 

 

  App 1        App 2                

                                                  Change Device                  Settings

PLAY DISC

PHOTOS

VIDEOS

MUSIC

No Disc 

New device connected.

Photos
Videos
Music

123

Move   " Enter   ' Return

 

✎

NotES

 `

If the pop-up does not appear, go to 

Method 2.

3.  Use the ▲▼ buttons to select photos, 

Videos, or Music, and then press the 

 button. The Photos, Videos & Music 

screen appears listing the content of the 

device. Depending on how the contents 

is arranged, you will see either folders, 

individual files, or both.

 

✎

NotES

 `

Even though the player will display folders 

for all content types, it will only display files 

of the Content Type you selected in Step 

3. For example, if you selected music, you 

will only be able to see music files. You can 

change this selection by returning to the 

Photos, Videos & Music screen and going 

to Step 3 in Method 2 below.

4.  If necessary, use the ▲▼◄► 

buttons to select a folder, and then 

press the v button.

5.  Select a file to view or play, and then 

press the v button.

6.  Press the 返回 button to exit a folder 

or the 退出 button to return to the 

Home screen.

7.  Go to pages 18~20 for instructions that 

explain how to control playback of videos, 

music, and pictures on a USB device.

Method 2
1.  Turn the player on.

2.  Connect the USB device to the 

USB port on the front panel of the 

player. Select Change device and 

then press the ▲▼ button to select 

uSB. Press the v button.