Samsung RF905QBLASL User Manual
16_
setting up
DISASSEMBLE THE FREEZER
DOORS
DOORS
• Be sure to remove the Fridge Door
before removing the Freezer Door.
• Be cautious with the wires being
attached on the bottom of the Freezer
Door while doing the disassembling.
Door while doing the disassembling.
1. With the Door being open, remove the screw
holding the cover (A) of the Adjust Leg at the
bottom of the Door with the Phillips (+)
Screwdriver and disassemble the Connector
(B).
bottom of the Door with the Phillips (+)
Screwdriver and disassemble the Connector
(B).
2. Lift up the Mid Hinge Cap(C) on the Door Hinge
above the Freezer Door to remove.
3. While pushing the Door in the direction of the
arrow, lift up the Mid Hinge Shaft (D).
4. Be careful that the Door does not touch on the
Mid Hinge (E). And, tilt the Door forward a little
and lift it up to remove.
and lift it up to remove.
CAUTION
A
B
C
D
1
2
E
REATTACHING THE
REFRIGERATOR DOORS
REFRIGERATOR DOORS
• Be sure to assemble the Freezer Door
before assembling the Fridge Door.
• Before doing the assembling, make sure
that all the wire connectors at the bottom
of the Freezer Door are assembled.
of the Freezer Door are assembled.
How to Assemble Freezer Door
1. Insert the door into the lower hinge (A) in the
direction of (1) and then push the door in the
direction of (2). At this time, take care not
scratch the door with the Mid-Hinge (B).
direction of (2). At this time, take care not
scratch the door with the Mid-Hinge (B).
• Be careful with the wires on the bottom
of the door not being damaged by being
stomped on, etc.
stomped on, etc.
2. Insert the Hinge Shaft (C) into the Mid Hinge
Hole (D) and put on the Hinge Cap (E).
When assembling the Hinge Shaft and the
Hinge Cap, be sure to check its assembling
direction.
Hinge Cap, be sure to check its assembling
direction.
3. With the Door being open, assemble the
connector on the bottom of the Door.
CAUTION
1
2
A
B
CAUTION
C
D
E
DA68-02836A-06.indb 16
2016. 6. 25. �� 8:51