Samsung RF905QBLASL Manuel D’Utilisation

 

setting up

DISASSEMBLE THE FREEZER 
DOORS

•  Be sure to remove the Fridge Door 

before removing the Freezer Door.

•  Be cautious with the wires being 

attached on the bottom of the Freezer 
Door while doing the disassembling.

1.  With the Door being open, remove the screw 

holding the cover (A) of the Adjust Leg at the 
bottom of the Door with the Phillips (+) 
Screwdriver and disassemble the Connector 
(B).

2.  Lift up the Mid Hinge Cap(C) on the Door Hinge 

above the Freezer Door to remove. 

 

3.  While pushing the Door in the direction of the 

arrow, lift up the Mid Hinge Shaft (D). 

4.  Be careful that the Door does not touch on the 

Mid Hinge (E). And, tilt the Door forward a little 
and lift it up to remove. 

REATTACHING THE 
REFRIGERATOR DOORS

•  Be sure to assemble the Freezer Door 

before assembling the Fridge Door.

•  Before doing the assembling, make sure 

that all the wire connectors at the bottom 
of the Freezer Door are assembled.

How to Assemble Freezer Door

 

1.  Insert the door into the lower hinge (A) in the 

direction of (1) and then push the door in the 
direction of (2). At this time, take care not 
scratch the door with the Mid-Hinge (B).  

•  Be careful with the wires on the bottom 

of the door not being damaged by being 
stomped on, etc.

 

2.  Insert the Hinge Shaft (C) into the Mid Hinge 

Hole (D) and put on the Hinge Cap (E).

When assembling the Hinge Shaft and the 
Hinge Cap, be sure to check its assembling 
direction. 

 

3.  With the Door being open, assemble the 

connector on the bottom of the Door. 

DA68-02836A-06.indb   16

2016. 6. 25.   �� 8:51