Nuance omnipage pro 6 Manual

To install and run OmniPage Pro, you need the following setup:

• Standard (68020 or greater) or Power Macintosh.

• System 7.0 or later.

• RAM for 680x0 processors: free memory of at least 5MB RAM. 

• RAM for Power Macintosh processors: free memory of at least 

5MB RAM if virtual memory is on or 7MB if virtual memory is 
off. 

• Hard disk space of at least 11MB available for OmniPage Pro files 

and temporary storage while OmniPage Pro is running.

• 12-inch monitor if you use the Image Assistant program. A 

256-color monitor is recommended.

If you use System 7.0 or 7.1, remove the 

Dragging Enabler

 file from 

your Extensions folder. OmniPage Pro installs an AppleGuide enabler 
from Apple that replaces the Dragging Enabler file.

OmniPage Pro supports most full-page scanners; see the supported 
scanner list in the Release Notes. Your scanner and the driver supplied 
by its manufacturer, if any, must be installed on your system according 
to the manufacturer's instructions. 

OmniPage Pro can open line art and grayscale TIFF and PICT image files 
produced by other scanners. See “Supported Import File Formats” on 
page 7-17.

Before you install OmniPage Pro, make sure your scanner is working on 
your system by using the scanning software supplied by the 
manufacturer.