Nuance omnipage pro 7 for macintosh User Manual
Selecting Your Scanner
Installation and Setup - 21
Selecting Your Scanner
To use a supported scanner with OmniPage Pro, you must select a
driver for it during installation. This gets installed as a Chooser
extension which must be selected before scanning in OmniPage Pro. See
the Scanner Setup Notes included in your OmniPage Pro package for
more information on scanner support.
Use the OmniPage Pro installer program to install additional Chooser
extensions if you change scanners. You only need to select your scanner
in the list; you do not need to reinstall the OmniPage Pro 7.0 application.
To select a scanner for OmniPage Pro:
1
Choose Chooser in the Apple menu.
2
Click the icon for your scanner extension.
For a list of supported scanners and their extensions, see the
Scanner Setup Notes .
Some extensions, such as Apple Scan, support multiple
scanners. Select your scanner model in the list that appears.
Depending on the make of your scanner, you may have to
select other scanner driver parameters such as the SCSI ID
number. The message No configuration found means that
you do not need to select any other scanner options.
3
Close the Chooser.
4 Start OmniPage Pro and choose Verify Scanner in the Settings
menu to make sure the scanner was selected correctly.
You must reselect your scanner in the Chooser if you install or
remove a scanners ADF support.
The Chooser
displays icons for
installed scanner
extensions and
other devices.