abit AN9 32X User Manual

 

3.6 Power Management Setup 

Phoenix – Award BIOS CMOS Setup Utility 

Power Management Setup 

  ACPI Suspend Type 

S3(Suspend-To-RAM) 

Item Help 

  - USB Resume from S3 

Disabled 

 

  Power Button Function 

Instant-Off 

 

  Wakeup by PME# of PCI 

Enabled 

 

  Wakeup by OnChip LAN 

Enabled 

 

  Wakeup by Alarm 

Disabled 

 

X - Day (of Month) Alarm 

 0 

 

X - Time (hh:mm:ss) Alarm  

 0: 0 : 0 

 

 Cool’n’Quiet Technology 

Auto 

 

  Power On Function 

Button Only 

 

X - KB Power On Password 

Enter 

 

X - Hot Key Power On 

Ctrl-F1 

 

  Restore on AC Power Loss 

Power Off 

 

   

 

 

   

 

 

   

 

 

   

 

 

↓↑→←:Move  Enter:Select  +/-/PU/PD:Value  F10:Save  ESC:Exit  F1:General Help 

F5:  Previous  Values   F6:  Fail-Safe  Defaults   F7:  Optimized  Defaults 

 

ACPI Suspend Type 

This item selects the type of Suspend mode. 

[S1(PowerOn-Suspend)]: Enables the Power On Suspend function. 

[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function. 

- 

USB Resume from S3 

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in 
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI 
Suspend Type” is set to [S3(STR)]. 

Power Button Function 

This item selects the method of powering off your system: 

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. 
This will prevent the system from powering off in case you accidentally hit or pushed the power 
button. 

[Instant-Off]:  Pressing and then releasing the power button at once will immediately power 
off the system. 

Wakeup by PME# of PCI 

When set to [Enabled], access through the add-on PCI card can remotely wake up the system 
that was in Soft-Off condition. The PCI card must support the wake up function. 

3-22 

AN9 32X