Справочник Пользователя для abit AN9 32X
3.6 Power Management Setup
Phoenix – Award BIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type
S3(Suspend-To-RAM)
Item Help
- USB Resume from S3
Disabled
Power Button Function
Instant-Off
Wakeup by PME# of PCI
Enabled
Wakeup by OnChip LAN
Enabled
Wakeup by Alarm
Disabled
X - Day (of Month) Alarm
0
X - Time (hh:mm:ss) Alarm
0: 0 : 0
Cool’n’Quiet Technology
Auto
Power On Function
Button Only
X - KB Power On Password
Enter
X - Hot Key Power On
Ctrl-F1
Restore on AC Power Loss
Power Off
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type
This item selects the type of Suspend mode.
[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.
[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.
-
USB Resume from S3
When set to [Enabled], this item allows you to use a USB device to wake up a system that is in
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].
Power Button Function
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system.
This will prevent the system from powering off in case you accidentally hit or pushed the power
button.
This will prevent the system from powering off in case you accidentally hit or pushed the power
button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power
off the system.
off the system.
Wakeup by PME# of PCI
When set to [Enabled], access through the add-on PCI card can remotely wake up the system
that was in Soft-Off condition. The PCI card must support the wake up function.
that was in Soft-Off condition. The PCI card must support the wake up function.
3-22
AN9 32X