Alcatel-Lucent omnistack 6148 User Manual

System Information

3-7

Use the System Information screen to display descriptive information about the 
switch, or for quick system identification as shown in the following figure and table.

System Name*

Name assigned to the switch system.

IP Address

IP address of the agent you are managing. The agent supports SNMP over UDP/

IP transport protocol. In this environment, all systems on the Internet, such as 

network interconnection devices and any PC accessing the agent (or running 

management software) must have an IP address. Valid IP addresses consist of 

four decimal numbers, of 0 to 255, separated by periods. Anything outside of this 

format will not be accepted by the configuration program.

Object ID

MIB II object identifier for switch’s network management subsystem.

Location*

Specifies the area or location where the system resides. 

Contact

*

Contact person for the system.

System Up Time

Length of time the current management agent has been running. 

*

Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to 

browse the whole string.