Alcatel-Lucent omniaccess User Manual
OmniAccess RN: User Guide
20
Part 031650-00
May 2005
4
Configure the values in the respective fields as shown in the table above
and click
Add
to enter the values.
5
Click
Apply
to apply the configuration and add the VRRP instance.
Enable Router
Pre-emption
Selecting this option means
that a switch can take over
the role of master if it detects
a lower priority switch
currently acting as master
that a switch can take over
the role of master if it detects
a lower priority switch
currently acting as master
For this topology it is
recommended NOT to select
this option.
recommended NOT to select
this option.
Priority
Priority level of the VRRP
instance for the switch. This
value is used in the election
mechanism for the master
instance for the switch. This
value is used in the election
mechanism for the master
It is recommended to leave this
as the default for this
topology.(default = 100).
as the default for this
topology.(default = 100).
Admin State
Administrative state of the
VRRP instance
VRRP instance
To start the VRRP instance,
change the admin state to UP.
change the admin state to UP.
VLAN
VLAN on which the VRRP
protocol will run.
protocol will run.
Configure this to be the VLAN
ID from step i.
ID from step i.