Alcatel-Lucent OmniSwitch 9000 Quick Setup Guide

34

Using WebView

OmniSwitch 9000 switches can be configured and monitored 
using WebView, Alcatel-Lucent’s Web-based device manage-
ment tool. WebView software is pre-installed in the switch; 
you are not required to load additional software.

Note. Although WebView software is pre-installed, you 

must first enable HTTP sessions for your switch before 

you can log in. Refer to 

 for more information.

WebView has been tested on the following Web browsers: 

Internet Explorer 6.0 for Windows 2000, Windows NT, 

and Windows XP

Netscape 4.79 for Solaris 2.8, and HP-UX 11.0

Netscape 7.1 for Windows 2000, Windows NT, and 

Solaris 2.8

Note. Before attempting to establish a WebView session, 
be sure that you have first unlocked the HTTP session 
type via the aaa authentication command. Otherwise, a 
login error will occur. See 

To access WebView and log in to a switch:

Open any Alcatel-Lucent-tested Web browser.