Alcatel-Lucent OmniSwitch 9000 快速安装指南
34
Using WebView
May 2007
OmniSwitch 9000 switches can be configured and monitored
using WebView, Alcatel-Lucent’s Web-based device manage-
ment tool. WebView software is pre-installed in the switch;
you are not required to load additional software.
using WebView, Alcatel-Lucent’s Web-based device manage-
ment tool. WebView software is pre-installed in the switch;
you are not required to load additional software.
Note. Although WebView software is pre-installed, you
must first enable HTTP sessions for your switch before
you can log in. Refer to
for more information.
Browser Compatibility
WebView has been tested on the following Web browsers:
•
Internet Explorer 6.0 for Windows 2000, Windows NT,
and Windows XP
•
Netscape 4.79 for Solaris 2.8, and HP-UX 11.0
•
Netscape 7.1 for Windows 2000, Windows NT, and
Solaris 2.8
Logging In to WebView
Note. Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See
To access WebView and log in to a switch:
1
Open any Alcatel-Lucent-tested Web browser.
Using WebView