Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-43
Command Usage
Specify E1, E1 ISDN PRI, or BRI Euro voice port cable type.
Syntax Options
Remarks
To use this command, the voice daughtercard connection type must be set to E1,
E1 ISDN PRI, or BRI Euro via the
E1 ISDN PRI, or BRI Euro via the
voice port interface type
command.
voice port cable type
voice port <
slot/port
>
[line build out] cable type {75 | 120}
Definitions:
slot
slot
Specifies slot number of voice switching daughtercard installed in switching module,
(e.g.,
(e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
line build out
Optional command syntax.
75
Specifies 75 Ohms for type of cable connected to port.
120
Specifies 120 Ohms for type of cable connected to port.
Default:
The default cable type setting is
The default cable type setting is
120
Ohms.
Command Examples:
voice port 2/1 line build out cable type 120
voice port 2/2 line build out cable type 75
voice port 2/1 cable type 120
voice port 2/2 cable type 75
voice port 2/2 line build out cable type 75
voice port 2/1 cable type 120
voice port 2/2 cable type 75