Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-46
Command Usage
Set T1 voice port facilities data link port role (network/user).
Syntax Options
Remarks
To use this command, the voice daughtercard connection interface type must be set to T1 via
the
the
voice port interface type
command.
voice port facilities data link port role
voice port <
slot/port
> facilities data link port role {network | user}
Definitions:
slot
slot
Specifies slot number of voice switching daughtercard installed in switching module,
(e.g.,
(e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
network
Indicates facilities data link port is controlled by the network, i.e., the VSD.
user
Indicates facilities data link port is controlled by the user, e.g., the telephone company.
♦ Syntax Note ♦
If the port role is network and the
fdlMode
is set to AT&T 54016
via the
voice port facilities data link protocol
command, then this
port periodically sends AT&T performance requests to customer
interface.
interface.
Default:
The default setting is
The default setting is
user
.
Command Examples:
voice port 2/1 facilities data link port role user
voice port 2/2 facilities data link port role network
voice port 2/2 facilities data link port role network