Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-67
Command Usage
Display Telephony Signaling channel(s).
Syntax Options
Screen Output
To view parameters for a voice signaling channel, type
view voice signaling channel
and a valid
voice signaling channel, e.g.,
view voice signaling channel 4/1/1,
and then press
<Enter>
.
A screen similar to the following displays.
*****************************************
Viewing Signaling Channel
*****************************************
!
voice signaling channel 4/1/1 protocol emi
!
voice signaling channel 4/1/1 companding mulaw
!
voice signaling channel 4/1/1 em dial tone on
!
voice signaling channel 4/1/1 emi glare report 5500
!
voice signaling channel emi digit wait 250
!
Viewing Signaling Channel
*****************************************
!
voice signaling channel 4/1/1 protocol emi
!
voice signaling channel 4/1/1 companding mulaw
!
voice signaling channel 4/1/1 em dial tone on
!
voice signaling channel 4/1/1 emi glare report 5500
!
voice signaling channel emi digit wait 250
!
view voice signaling channel
view voice signaling channel <
slot/port/startChannel-endChannel
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed (e.g.,
2
).
port
Specifies physical port number on voice daughtercard (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
Default:
None
None
Command Examples:
view voice signaling channel 2/1/1-12
view voice signaling channel 2/2/13-12
view voice signaling channel 2/3/31-30
view voice signaling channel 2/2/13-12
view voice signaling channel 2/3/31-30