Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-70
Command Usage
Specify duration for each single tone (digit) dialed out.
Syntax Options
voice signaling out tone digit duration
voice signaling channel <
slot/port/startChannel-endChannel
> out tone digit duration <
value
>
Definitions:
slot
slot
Specifies slot number of voice daughtercard installed in switching module, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
When tone dialing is used, specifies in milliseconds from 0 ms to 2000, the duration of
each tone, (e.g.,
each tone, (e.g.,
2000
).
♦ Syntax Note ♦
Do not use commas when entering the duration of a tone (for
example,
example,
2,000
will return a syntax error message).
Default:
The default value is
The default value is
200
.
Command Examples:
voice signaling channel 2/1/1-12 out tone digit duration 0
voice signaling channel 2/2/13-24 out tone digit duration 200
voice signaling channel 2/3/1-30 out tone digit duration 2000
voice signaling channel 2/2/13-24 out tone digit duration 200
voice signaling channel 2/3/1-30 out tone digit duration 2000