Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-74
Command Usage
Specify time to wait for call to be answered (channel timing). The call is automatically termi-
nated if the call destination does not answer within the allotted time period for answering.
nated if the call destination does not answer within the allotted time period for answering.
Syntax Options
voice signaling answer wait limit
voice signaling channel <
slot/port/startChannel-endChannel
> [no] answer wait limit <
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
no
Specifies no answer wait limit (i.e., infinite).
value
Specifies time to wait before disconnecting a call when there is no answer at the destina-
tion, in seconds, from 0 ms to 65,534.
tion, in seconds, from 0 ms to 65,534.
♦ Syntax Notes ♦
Do not use commas when entering the no answer wait limit (for
example,
example,
65,534
will return a syntax error message).
Do not use
no
if entering a value.
A “no answer wait limit” means wait forever for the
call to be answered.
A “no answer wait limit 100” or any other number of
seconds, means wait forever for calls to be
answered.
Default:
The default setting is
The default setting is
no answer wait limit
.
Command Examples:
voice signaling channel 2/1/1-12 no answer wait limit
voice signaling channel 2/2/13-24 answer wait limit 0
voice signaling channel 2/3/1-20 no answer wait limit 100
voice signaling channel 2/2/13-24 answer wait limit 0
voice signaling channel 2/3/1-20 no answer wait limit 100