Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-127
Command Usage
Specify Foreign Exchange Station Ground Start (FXS GS) debounce interval for on-hook tran-
sition.
sition.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxs gs on hook debounce
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs on hook debounce <
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the debounce (delay interval) transition time to on-hook (seize detect) condition,
in milliseconds from 0 to 1,000, (e.g.,
in milliseconds from 0 to 1,000, (e.g.,
20
).
♦ Syntax Note ♦
Do not use commas when entering the fxs gs debounce interval
on-hook transition value (for example,
on-hook transition value (for example,
1,000
will return a syntax
error message).
Default:
The default value is
The default value is
20
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs on hook debounce 20
voice signaling channel 2/2/13-24 fxs gs on hook debounce 500
voice signaling channel 2/3/1-24 fxs gs on hook debounce 1000
voice signaling channel 2/2/13-24 fxs gs on hook debounce 500
voice signaling channel 2/3/1-24 fxs gs on hook debounce 1000