Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-128
Command Usage
Specify Foreign Exchange Station Ground Start (FXS GS) minimum time to wait before declar-
ing on-hook by the call originator to the call answerer.
ing on-hook by the call originator to the call answerer.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
FXO (Loop and Ground Start) commands will take effect.
voice signaling fxs gs originate clear detect
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs originate clear detect
<
value
>
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value
Specifies the minimum time to wait if call originator hangs up before on-hook condition
declared, in milliseconds from 1 to 60,000, (e.g.,
declared, in milliseconds from 1 to 60,000, (e.g.,
200
).
♦ Syntax Note ♦
Do not use commas when entering the fxs gs call originate clear
detect value (for example,
detect value (for example,
10,000
will return a syntax error
message).
Default:
The default value is
The default value is
200
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs originate clear detect 200
voice signaling channel 2/2/13-24 fxs gs originate clear detect 30000
voice signaling channel 2/3/1-30 fxs gs originate clear detect 60000
voice signaling channel 2/2/13-24 fxs gs originate clear detect 30000
voice signaling channel 2/3/1-30 fxs gs originate clear detect 60000