Alcatel-Lucent omniacces-voip gateway User Manual

Page 5-136

Set Foreign Exchange Station Ground Start (FXS GS) ring ID, or continental ring tone vari-
ance for North America or Europe.

The 

 command must be set to the corresponding protocol type before 

any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.

The ring cadence that is set for the first channel on the first port is automatically set for all 
remaining FXS/FXO ports.

All ports must have the same ring cadence.

On the OmniAccess 512, the ring cadence can only be specified for port 1.

On the Omni Switch/Router, the ring cadence can only be specified for port 1 (or 9 for a dual 
VSA-FXS/FXS in an HSX-H).

Definitions: 
slot

Specifies chassis slot number where VSM is installed, (e.g., 

).

Specifies physical port number on voice daughtercard, (e.g., 

).

The first number in the range of voice channels (e.g., 

).

The last number in the range of voice channels (e.g., 

).

♦ Syntax Note ♦

Be sure to separate the start and end range numbers with a 

hyphen (e.g., 

).

Specifies variance in continental ring tone for either North America or Europe (e.g., 

) as 

per selected coefficient. The value 

 is the same as 

.

Sets the tone variance to the default setting, i.e, 0.

♦ Syntax Note ♦

This command must be set in relation to the 

command.

Default:
The default value is 

.

Command Examples: