Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-149
Command Usage
Set outbound tone table (ringing/silence) for telephony channel identifier (TCID).
Syntax Options
voice signaling tone table
voice signaling channel <
slot/port/startChannel-endChannel
> tone table {ringing | silence}
Definitions:
slot
slot
Specifies slot number of voice daughtercard installed in switching module, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
ringing
Sets tone table for TCID to ringing (for “normal” ringback sound).
silence
Sets tone table for TCID to silence (for “silent” ringback).
Default:
The default setting is
The default setting is
ringing
.
Command Examples:
voice signaling channel 2/1/1-12 tone table ringing
voice signaling channel 2/2/13-24 tone table silence
voice signaling channel 2/2/13-24 tone table silence