Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-188
Command Usage
Specify coding profile maximum delay.
Syntax Options
Remarks
Maximum delays must not be greater than the values shown in the following table.
voice coding profile voice network delay buffer max delay
voice coding profile <
“codingProfName”
> voice network delay buffer max[imum] delay <
value
>
Definitions:
codingProfName
codingProfName
Identifies coding profile by name, (e.g.,
salemprof1
); maximum length of 40 characters.
The following characters are permitted in the coding profile name: a-z, A-Z, 0-9, space and
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }
imum
Optional command syntax. Type either
max
or
maximum
in the command line.
value
Specifies the voice network buffer maximum delay, in milliseconds from 1 to 1000,
(e.g.,
(e.g.,
30
). The maximum delay should be at least two times greater than the nominal delay
(in milliseconds); MaxDelay = k * packet time, where k > j = 2.
♦ Syntax Notes ♦
Do not use commas when entering the voice network buffer
maximum delay value, (for example,
maximum delay value, (for example,
1,000
will return a syntax
error message).
Default:
The default value is
The default value is
240
milliseconds.
Command Example:
voice coding profile salemprof1 voice network delay buffer maximum delay 240
voice coding profile salemprof2 voice network delay buffer max delay 500
voice coding profile calabprof1 voice network delay buffer max delay 1000
voice coding profile salemprof2 voice network delay buffer max delay 500
voice coding profile calabprof1 voice network delay buffer max delay 1000
Coding Profile Voice Network Buffer
Codec
Maximum Delay
G.711 64 kbps
160 ms
G.729ab
500 ms
G.723.1
500 ms