Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-190
Command Usage
Set coding profile voice activity threshold mode (adaptive/relative).
Syntax Options
Remarks
This command is used to set the audio threshold level (in dBm) for the voice activity detec-
tor (VAD) for a coding profile to be adaptive or relative to a reference level of -30 dBm.
tor (VAD) for a coding profile to be adaptive or relative to a reference level of -30 dBm.
voice coding profile voice activity detection threshold mode
voice coding profile <
“codingProfName”
> voice activity detection threshold mode
{adaptive | relative}
Definitions:
codingProfName
codingProfName
Identifies coding profile by name, (e.g.,
salemprof1
); maximum length of 40 characters.
The following characters are permitted in the coding profile name: a-z, A-Z, 0-9, space and
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }
adaptive
Indicates adaptive voice activity detection audio threshold mode for specified coding pro-
file.
file.
relative
Indicates relative voice activity detection audio threshold mode for specified coding pro-
file.
file.
♦ Syntax Notes ♦
To use this command, the voice activity detector mode must be
enabled via the
enabled via the
voice coding profile voice activity detector
command.
If this command is adaptive in the switch, the threshold value is
automatically 32767 dBm.
automatically 32767 dBm.
If this command is relative in the switch, the voice activity detec-
tion has no bearing on the hardware or VoIP.
tion has no bearing on the hardware or VoIP.
Default:
The default setting is
The default setting is
adaptive
.
Command Example:
voice coding profile salemprof1 voice activity detection threshold mode adaptive
voice coding profile calabprof2 voice activity detection threshold mode relative
voice coding profile calabprof2 voice activity detection threshold mode relative