Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-222
Command Usage
Specify voice switching daughtercard gateway endpoint registration type (if gatekeeper used).
Syntax Options
Remarks
This command is used to set the H.225.0 endpoint registration type of the voice switching
daughtercard. This should not be confused with the H.245 terminal type, although the two
parameters should be programmed consistently. This parameter specifies how the endpoint
will register itself with the gatekeeper, and has nothing to do with master/slave determina-
tion. See the RADVision H.323 Gatekeeper User Manual for more information.
daughtercard. This should not be confused with the H.245 terminal type, although the two
parameters should be programmed consistently. This parameter specifies how the endpoint
will register itself with the gatekeeper, and has nothing to do with master/slave determina-
tion. See the RADVision H.323 Gatekeeper User Manual for more information.
voice network h.323 endpoint registration type
voice network card <
slot/card_number
> h.323 endpoint registration type {gateway | terminal}
Definitions:
slot
slot
Specifies the chassis slot number where VSM is installed, (e.g.,
2
).
card_number
Specifies the voice daughtercard position number, (e.g.,
1
).
gateway
Enables gateway endpoint registration.
terminal
Enables v registration.
♦ Syntax Note ♦
The only time this command should be set to
terminal
is when an
analog voice switching daughtercard is in use, and only one
phone number and one analog port are in service.
phone number and one analog port are in service.
Default:
The default setting is
The default setting is
gateway
.
Command Example:
voice network card 2/1 h.323 endpoint registration type gateway
voice network card 2/2 h.323 endpoint registration type terminal
voice network card 2/2 h.323 endpoint registration type terminal