Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-224
Command Usage
Specify H.323 display name for voice switching daughtercard gateway.
Syntax Options
Remarks
This command is used to set the display name information that is carried in the H.323 setup
messages. The display name string is inserted into the Q.931 display information and source
address field of the H.323 setup (UUIE).
messages. The display name string is inserted into the Q.931 display information and source
address field of the H.323 setup (UUIE).
voice network h.323 display name
voice network card <
slot/card_number
} h.323 display name <
“string”
>
Definitions:
slot
slot
Specifies the chassis slot number where VSM is installed, (e.g.,
2
).
card_number
Specifies the voice daughtercard position number, (e.g.,
1
).
string
Any string up to 64 bytes, (e.g.,
salemgway
). The display name is carried as an H.323_ID
alias name.
♦ Syntax Note ♦
H.323 display name string must be specified before the voice
switching daughtercard is activated. A non-null string value is
required.
switching daughtercard is activated. A non-null string value is
required.
Default:
None
None
Command Example:
voice network card 2/1 h.323 display name salemgway
voice network card 2/2 h.323 display name calabgway
voice network card 2/2 h.323 display name calabgway