Alcatel-Lucent omniacces-voip gateway User Manual
VoIP Commands
Page 5-136
Command Usage
Set Foreign Exchange Station Ground Start (FXS GS) ring ID, or continental ring tone vari-
ance for North America or Europe.
ance for North America or Europe.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
FXO (Loop and Ground Start) commands will take effect.
The ring cadence that is set for the first channel on the first port is automatically set for all
remaining FXS/FXO ports.
remaining FXS/FXO ports.
All ports must have the same ring cadence.
On the OmniAccess 512, the ring cadence can only be specified for port 1.
On the Omni Switch/Router, the ring cadence can only be specified for port 1 (or 9 for a dual
VSA-FXS/FXS in an HSX-H).
VSA-FXS/FXS in an HSX-H).
voice signaling fxs gs ring id
voice signaling channel <
slot/port/startChannel-endChannel
> fxs gs ring id {0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
default}
Definitions:
slot
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port
Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel
The last number in the range of voice channels (e.g.,
30
).
♦ Syntax Note ♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
0, 1, 2, 3, 4, 5, 6, 7
Specifies variance in continental ring tone for either North America or Europe (e.g.,
2
) as
per selected coefficient. The value
0
is the same as
default
.
default
Sets the tone variance to the default setting, i.e, 0.
♦ Syntax Note ♦
This command must be set in relation to the
voice signaling
fxs gs ring cadence coefficient
command.
Default:
The default value is
The default value is
0
.
Command Examples:
voice signaling channel 2/1/1-12 fxs gs ring ID default
voice signaling channel 2/2/13-24 fxs gs ring ID 0
voice signaling channel 2/3/1-30 fxs gs ring ID 7
voice signaling channel 2/2/13-24 fxs gs ring ID 0
voice signaling channel 2/3/1-30 fxs gs ring ID 7