Alcatel-Lucent speedtouch 180 User Manual
2 SpeedTouch™180 Web Interface
E-DOC-CTC-20040401-0003 v2.0
19
2.2 LAN Links
Introduction
You can configure the LAN settings from here. The appearance of this page will differ
depending on your SpeedTouch™ operation mode:
depending on your SpeedTouch™ operation mode:
Lan Settings page
Use the LAN Settings page to configure the LAN IP address. In Access Point Mode, you
may choose to use a static address or to obtain an IP address from a DHCP server.
may choose to use a static address or to obtain an IP address from a DHCP server.
Note
The device will automatically start up with its default static IP address,
10.0.0.140
.
The LAN links page allows you to configure:
•
AP Name
:
DNS name of the access point. (This naming feature is optional.)
Note
Do
not
use spaces in the AP name.
•
IP Settings
:
Selects a dynamic or fixed IP address.
Note
This field will not be shown in Client Bridge mode.
If you choose to configure the SpeedTouch™180 statically two additional fields become
available:
available:
•
IP address
:
The IP Address of the SpeedTouch™180.
•
Subnet Mask
:
The subnet mask of the network.