Alcatel-Lucent speedtouch 180 User Manual
2 SpeedTouch™180 Web Interface
E-DOC-CTC-20040401-0003 v2.0
21
2.3.1 Basic Setting
Availability
The Basic Setting page is available in all operation modes.
Access Point and
Repeater Mode
Click Basic Setting to set the channel, Service Set ID (SSID), and transmit speed for
your wireless network.
your wireless network.
The wireless settings are listed in the table below.
Parameter
Description
Enable Wireless Networking
Enables/disables wireless networking.
Channel
The radio channel used for the SpeedTouch™ to
communicate with the wireless clients. The Speed-
Touch™ will automatically assign itself a radio
channel, or you may select one manually.
The available channel settings might be limited by
local regulations.
communicate with the wireless clients. The Speed-
Touch™ will automatically assign itself a radio
channel, or you may select one manually.
The available channel settings might be limited by
local regulations.
SSID
The wireless Network Name. This should be set to
the same value as other wireless devices on your
network.
The SSID is
the same value as other wireless devices on your
network.
The SSID is
case sensitive
and can consist of up to
32 alphanumeric characters.
SSID broadcast
By default the SpeedTouch™180 broadcasts its
Network Name (SSID) to the WLAN clients.
WLAN clients using this broadcast SSID or using an
empty SSID can join the SpeedTouch™180.
Network Name (SSID) to the WLAN clients.
WLAN clients using this broadcast SSID or using an
empty SSID can join the SpeedTouch™180.
Transmit Rate
The transmit rate is automatically adjusted based on
the receiving data error rate. Usually the connec-
tion quality will vary depending on the distance
between the wireless router and wireless clients.
You can also select a lower transmission rate to
maximize the radio communication range. (Default:
Automatic)
the receiving data error rate. Usually the connec-
tion quality will vary depending on the distance
between the wireless router and wireless clients.
You can also select a lower transmission rate to
maximize the radio communication range. (Default:
Automatic)