Alpine 68-14470Z51-A User Manual
37
-EN
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder
SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
encoder
.
Setting item: SUBW. Phase
Setting contents:
PHASE 0° (Initial setting) / PHASE 180°
You can set the subwoofer output to stereo or monaural. Make sure to
set the correct output for your subwoofer type.
set the correct output for your subwoofer type.
Setting item: SUBW. Channel
Setting contents:
STEREO (Initial setting) / MONO
STEREO:
Subwoofer stereo (L/R) output
MONO:
Subwoofer monaural output
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
musical source material.
Flat Pops Rock News Jazz&Blues Electrical Dance
Hip Hop&Rap Easy Listening Country Classical
User1 User2 User3 User4 User5 User6
Hip Hop&Rap Easy Listening Country Classical
User1 User2 User3 User4 User5 User6
Note
• By selecting User's 1 to 6, you can recall the stored preset number (refer
to “Adjusting the Graphic Equalizer Curve” on page 38 or refer to
“Adjusting the Parametric Equalizer Curve” on page 38).
“Adjusting the Parametric Equalizer Curve” on page 38).
Setting the response characteristic of tweeter to FLAT in 2.2ch (3WAY)
mode could damage the speaker. Make sure the Crossover cut-off is
appropriate for the tweeter being used (Refer to “Adjusting the
Crossover Settings” on page 38).
mode could damage the speaker. Make sure the Crossover cut-off is
appropriate for the tweeter being used (Refer to “Adjusting the
Crossover Settings” on page 38).
Setting item: TW Setup
Setting contents:
FACTORY’S (Initial setting) / USER’S
FACTORY’S:
As protection from possible speaker damage, FLAT cannot be set
for the response slope of the high range speaker in 2.2ch (3WAY)
mode.
for the response slope of the high range speaker in 2.2ch (3WAY)
mode.
USER’S:
The FLAT setting is possible in 2.2ch (3WAY) mode.
Setting item: Filter Type
Setting contents:
NORMAL (Initial setting) / INDIVIDUAL
NORMAL (L=R):
Left and right speakers are adjusted equally.
INDIVIDUAL (L/R):
Left and right speakers are individually adjusted.
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to “Setting the MX Level” on page 37).
(refer to “Setting the MX Level” on page 37).
Setting item: Media Xpander
Setting contents:
OFF (Initial setting) / ON
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB Memory and
iPhone/iPod, will be able to reproduce the music clearly even in cars
with a lot of road noise.
regardless of the music source. The FM radio, CD, USB Memory and
iPhone/iPod, will be able to reproduce the music clearly even in cars
with a lot of road noise.
1
Changing the source to which you want to apply Media
Xpander.
Xpander.
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and produces
well balanced sound at all frequencies.
well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback. MX
takes advantage of this large data quantity to reproduce a more
clear, clean output.
takes advantage of this large data quantity to reproduce a more
clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of compression.
This reproduces a well-balanced sound close to the original.
This reproduces a well-balanced sound close to the original.
DVD (Video CD) (MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as music
clip. MX uses this data to reproduce the sound accurately.
clip. MX uses this data to reproduce the sound accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that corresponds
to the media connected.
to the media connected.
Notes
• Each music source, such as FM radio, CD, and MP3/WMA/AAC can
have its own MX setting.
• On disks with both MP3/WMA/AAC and CD-DA, when the source
changes from “MP3/WMA/AAC to CD-DA” or “CD-DA to MP3/
WMA/AAC”, MX-mode switching may delay playback slightly.
WMA/AAC”, MX-mode switching may delay playback slightly.
• Setting to Non Effect sets MX mode of each music source to OFF.
• The function is inoperable when DEFEAT is set to ON.
• There is no MX mode for AM radio.
• If an audio processor with the MX function (PXA-H701, etc.) is
• The function is inoperable when DEFEAT is set to ON.
• There is no MX mode for AM radio.
• If an audio processor with the MX function (PXA-H701, etc.) is
connected, its own MX processing is applied to the music source. Since
the processor MX settings may not match the head unit, the audio
processor needs to be adjusted. For details, refer to the Owner’s Manual
of the audio processor.
the processor MX settings may not match the head unit, the audio
processor needs to be adjusted. For details, refer to the Owner’s Manual
of the audio processor.
• “CMPM” is applied for MP3/WMA/AAC and iPhone/iPod.
• “SAT” is applied for XM radio and SIRIUS radio.
• “SAT” is applied for XM radio and SIRIUS radio.
This setting gives you a choice of 5-band parametric, or 7-band graphic
equalizer.
equalizer.
Setting item: EQ Mode
Setting contents:
Parametric EQ (Initial setting) / Graphic EQ
PEQ:
5-band Parametric EQ
GEQ:
7-band Graphic EQ
Setting the Subwoofer Phase
Setting the Subwoofer Channel (SUBW.
Channel)
Channel)
Equalizer Presets (Factory’s EQ)
Setting the Response Slope for the High
Range Speaker (TW Setup)
Range Speaker (TW Setup)
Setting the Filter type
Turning Media Xpander ON/OFF
Setting the MX Level
Setting EQ mode