Alpine dva-9965r User Manual
22
-EN
ALPINE DVA-9965R 68-02065Z31-A (EN)
Sound Setting
Adjusting Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat
Fader (Between Front and Rear)/Defeat
1
Press the Rotary encoder (MODE) repeatedly to
choose the desired mode.
choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER*
1
→ BALANCE → FADER → DEFEAT →
VOLUME
→ SUBWOOFER*
1
Subwoofer : 0 ~ +15
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is switched NORMAL
(PHASE 0°) or REVERS (PHASE 180°).
and the subwoofer output phase is switched NORMAL
(PHASE 0°) or REVERS (PHASE 180°).
• If the Rotary encoder (MODE) is not pressed within 5 seconds
after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER
mode, the unit automatically returns to normal mode.
mode, the unit automatically returns to normal mode.
• If you set the 2WAY/3WAY switch (pages 68, 69 and 71) to 3WAY,
you cannot adjust the FADER mode.
*
1
When the subwoofer mode is set to OFF, its level and phase cannot
be adjusted.
be adjusted.
2
Turn the Rotary encoder (MODE) until the
desired sound is obtained in each mode.
desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of EQ
will return to the factory defaults and MX is turned off.
will return to the factory defaults and MX is turned off.
• If an external audio processor is connected, refer to “External
Audio Processor (Optional)” (pages 45 to 52).
BAND
SOURCE/
POWER
POWER
g
f
FUNC.
GlideTouch bar
Rotary encoder (MODE)
MENU
;/:/8/9/
ENT.
ENT.
RTN
GlideTouch bar Operation
The GlideTouch bar controls the same functions as the unit buttons
and remote control.
and remote control.
1
Press FUNC. then select the desired mode.
Source select mode
→
Audio function mode 1* (;, :, ENT., etc.)
→
Audio function mode 2 (AUDIO, RPT, etc.)
→
Source operation mode (g, f , etc.)
→
Source select mode
* DVD mode only.
2
The function guide of the selected mode is
displayed.
displayed.
3
Press the position on the GlideTouch bar which
corresponds to the function guide in the display.
corresponds to the function guide in the display.
Source Operation Mode
<DVD/Video CD mode>
L
Stopping Playback (PRE-STOP)
page18
L
Stopping Playback
page19
(/)
Fast-forward/Fast-reverse
page19
g/f Find the Beginning of Chapters or Tracks
page19
:
Playback
page19
J
Still (pause)
page19
g/f Forward/Reverse frame-by-frame playback
page19
(/)
Slow Motion Playback
page19
• When FUNC. is pressed again, AF, P.PTY is displayed.
Audio Function Mode
<DVD mode>
page18
Return to the previous display
(Depending on the disc, it may not be possible to
(Depending on the disc, it may not be possible to
return to the previous display.)
FUNC.
Press FUNC. to change.
TOP.M
Recall the top menu display
page18
MENU
Recall the menu display
page18
AUDIO
Switching the Audio Tracks
page20
SUBT.
Switching the Subtitles
page21
ANGLE
Switching the angle
page21
RPT
Chapter/Title repeat playback
page20
• When FUNC. is pressed again, AF, P.PTY is displayed.
<Video CD mode>
AUDIO
Change audio output
page20
RPT
Chapter/Track repeat playback
page20
PBC
Set Video CD playback mode
page37
RTN
Return to the previous display
(Depending on the disc, it may not be possible to
return to the previous display.)
• When FUNC. is pressed again, AF, P.PTY is displayed.
B
C
Selection button when the menu display is
indicated.
indicated.