Alpine dva-9965r User Manual

-EN

ALPINE DVA-9965R 68-02065Z31-A (EN)

Adjusting and Storing the Parametric
Equalizer Curve

You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
To adjust the parametric equalizer curve, set the EQ mode to P.EQ.
For details, refer to “Setting User's EQ mode” (this page).

Press and hold MENU for at least 2 seconds.

Select the Parametric EQ mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Parametric
EQ mode.

Press BAND to select the band to be adjusted.

BAND1

→ BAND2 → … BAND9 → BAND1

• For the adjustable range of each band, refer to “Adjustable Range

of each Band for Parametric Equalizer” (page 25).

Select the frequency by sliding your finger on the
GlideTouch bar to the left or right.

Adjust the level by turning the Rotary encoder.

Adjustable level: ±7step (1step: 1.3dB)

Press SOURCE/POWER to set the band width (Q).

To adjust another band, repeat steps 3 to 6 and
adjust all bands.

When the setting has been completed, press
FUNC. or the GlideTouch bar to activate the
preset mode.

Select any one of the preset numbers (1 through 6)
by sliding your finger on the GlideTouch bar to
the left or right. Press and hold the GlideTouch
bar under the desired preset for at least 2 seconds.
The adjustments are saved in the selected preset.

After setting, press and hold MENU for at least 2
seconds to return to normal mode.

• This function is inoperable when DEFEAT is set to ON (page 22).
• If MENU is pressed while adjusting or setting items in the MENU

mode, the unit returns to the previous selection screen.

• By pressing the GlideTouch bar under RETURN in the MENU

mode, the unit returns to the normal mode.

• If no operation is performed for 60 seconds, the unit returns to

normal mode.

Selecting the EQ mode (Factory settings)

Press MENU.

Select the Factory’s EQ mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Factory’s EQ mode.

Select the desired equalizer characteristic by
sliding your finger on the GlideTouch bar to the
left or right.

• By selecting USER'S 1 to 6, you can recall the stored preset

number in “Adjusting and Storing the Parametric Equalizer
Curve” (this page) or “Adjusting and Storing the Graphic
Equalizer Curve” (page 24).

Press and hold MENU for at least 2 seconds to
return to normal mode.

• If MENU is pressed while adjusting or setting items in the MENU

mode, the unit returns to the previous selection screen.

• By pressing the GlideTouch bar under RETURN in the MENU

mode, the unit returns to the normal mode.

• This function is inoperable when DEFEAT is set to ON (page 22).
• If no operation is performed for 60 seconds, the unit returns to

normal mode.

Setting User's EQ mode

This setting gives you a choice of 9-band parametric, or 9-band
graphic equalizer.

Press MENU.

Select Setup by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under Setup.

The main SETUP menu is displayed.

Select AUDIO by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under AUDIO.

The AUDIO SETUP menu is displayed.

Select EQ MODE by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under EQ MODE.

Select EQ Type by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under P.EQ or G.EQ.

P.EQ : 9-band parametric EQ (initial setting)
G.EQ : 9-band graphic EQ

Press and hold MENU for at least 2 seconds to
return to normal mode.

• If MENU is pressed while adjusting or setting items in the MENU

mode, the unit returns to the previous selection screen.

• By pressing the GlideTouch bar under RETURN in the MENU

mode, the unit returns to the normal mode.

• If no operation is performed for 60 seconds, the unit returns to

normal mode.