Alpine ivx-m706r User Manual
12
-EN
Radio Operation
1
6
FUNC
BAND
1
FUNC
6
3 4
3 4
BAND
Function buttons
(
(
1
through
6
)
Function buttons
(
(
1
through
6
)
Mono/Stereo Switching
Use the Mono (monaural) mode to reduce the
noise level of noisy stereo broadcast due to weak
signal.
noise level of noisy stereo broadcast due to weak
signal.
1
Press the
4
(MONO) button in the radio mode.
"STEREO" indicator disappears and the
monaural mode activates.
monaural mode activates.
2
To return to the stereo mode, press the
4
(MONO) button again.
NOTE
"STEREO" indicator appears when a stereo station is
tuned in.
tuned in.
Manual Storing of Station Presets
1
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
2
Press and hold any one of the Function buttons
1
(P.SET1) through
6
(P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
display, P.SET1 through P.SET6, will blink for 5
seconds.
3
While the P.SET1 through P.SET6 indicators in
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
NOTE
If a preset memory has already been set in the same
Function button, it will be cleared and the new station
will be memorized.
Function button, it will be cleared and the new station
will be memorized.
5
5
(IVX-C806)
(IVX-M706 .... with MD built-in
CVA-1006R ... without MD built-in)
CVA-1006R ... without MD built-in)