Alpine vpa-b211p-space-e User Manual

• Protective circuit of the changer is activated due to high

temperature.
- The indicator will disappear when the temperature

returns to within operation range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does not

eject, consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the Eject button to activate the eject function. When

the CD Changer finishes the eject function, insert an
empty CD magazine into the CD Changer to receive the
disc left inside the CD Changer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

In Case of Difficulty

If you encounter a problem, please turn the power off,
then on again. If the unit is still not functioning
normally, please review the items in the following
checklist. This guide will help you isolate the problem if
the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your
authorized Alpine dealer.

No function or display.
• Vehicle’s ignition is off.

- If connected according to the instructions, the unit will

not operate with the vehicle’s ignition off.

• Improper power lead connections.

- Check power lead connections.

• Blown fuse.

- Check the fuse on the battery lead of the unit; replace

with the proper value if necessary.

• Internal micro-computer malfunctioned due to interference

noise, etc.
- Press the RESET switch with a ballpoint pen or other

pointed article.

No sound or unnatural sound.
• Connections are not properly or securely made.

- Check the connections and firmly connect.

Screen not displayed.
• Connections to the DVD, CD player, navigation system are

not securely made.
- Check the connections and firmly connect.

Navigation system inoperative.
• Connections to the navigation system are incorrect.

- Check the connections with the navigation system and

connect the cables correctly and firmly.

Remote control of the rear monitor is inoperative.
• The VPE-S431 is not connected.

- Make sure the VPE-S431 is correctly connected.

Make sure the cable is not bent excessively.