Alpine vpa-b211p-space-e User Manual
17
-EN
Indication for iPod Mode
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the KCA-
420i.
• Communication error
- Turn the ignition key off, and then set to ACC or ON
again.
- Check the display by reconnecting between the iPod and
the adapter, using the iPod cable.
• Caused by the iPod Software Version not being compatible
with the optional adapter KCA-420i.
- Refer to the Owner's Manual of the optional adapter
- Refer to the Owner's Manual of the optional adapter
KCA-420i, and update the iPod Software Version to be
compatible with the optional adapter KCA-420i.
compatible with the optional adapter KCA-420i.
Indication for AUX Mode
• The optional expansion box (VPE-S431) is not correctly
connected.
- Make sure the VPE-S431 is correctly connected, and the
- Make sure the VPE-S431 is correctly connected, and the
cable is not bent excessively.
Specifications
External dimensions
Wide
180 mm (7-1/8")
Height
35 mm (1-3/8")
Depth
160 mm (6-1/4")
Weight
0.75 kg (1lb 10 oz)
NO iPod
NO SONG
ERROR
I/F BOX ERROR
Installation
Velcro fastener Mounting
When mounting the unit with the Velcro fasteners, be sure to
choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear
deck with the Velcro fasteners.
choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear
deck with the Velcro fasteners.
1
Remove the protective paper and attach two
pieces of velcro fastener to the bottom of the
VPA-B211P/VPA-B211E.
pieces of velcro fastener to the bottom of the
VPA-B211P/VPA-B211E.
2
Check the position, and then fix the VPA-
B211P/VPA-B211E to the floor carpet.
B211P/VPA-B211E to the floor carpet.
Screw-down Mounting
1
Using the adapter as a template, hold it in the
mounting location and mark the holes to be
drilled. Before drilling, make sure that there
are no objects that could be damaged behind
the mounting surface.
mounting location and mark the holes to be
drilled. Before drilling, make sure that there
are no objects that could be damaged behind
the mounting surface.
2
Drill holes and secure the adapter with the
self-tapping screws (M4
self-tapping screws (M4
× 14) supplied.
Velcro Fasteners
(Included)
(Included)
Protective paper
Protective paper
(AUX3 mode only)