Alpine vpa-b211p-space-e User Manual

-EN

Initial System Start-Up

Be sure to press the RESET button when using the unit for
the first time, after installing the CD changer, after changing
the car battery, etc.

Turn off the unit power.

Press RESET with a ball-point pen or similar
pointed object.

<VPA-B211P>

<VPA-B211E>

Switching between NTSC and PAL

Set the output configuration to NTSC or PAL.

Press and hold POWER for at least 2 seconds.

• PAL is the standard and there is no need to change the

setting. The system is set to PAL at time of shipment from
the factory.

Lowering Volume Quickly

Activating this function will instantly lower the volume level.

Press MUTE.

No volume is output.

Pressing MUTE again brings the audio back to its
previous level.

Switching a Source

Press SOURCE.

• Source can be switched by setting FRONT on the VIDEO

SOURCE SEL screen. Refer to “Switching Each Monitor
Source (VIDEO SOURCE SELECT Function)” (this page).

RESET

Other Useful Features

Switching Each Monitor Source
(VIDEO SOURCE SELECT Function)

If the optional expansion box (VPE-S431) is connected, you
can connect up to 2 external rear monitors.
The source is switched between the external front monitor
and the external rear monitor using the VIDEO SOURCE
SELECT function.

Press and hold MUTE for at least 2 seconds.

The SETUP screen is displayed.

Press 8 or 9 to select VIDEO SOURCE SEL.

Press -/J/SEARCH or f.

The VIDEO SOURCE SEL. screen is displayed.

Press 8 or 9 to select a monitor from which
the source of FRONT/REAR 1/REAR 2 is set.

FRONT: External front monitor
REAR 1: External rear monitor connected to AUX

OUT1 of the optional expansion box (VPE-
S431).

REAR 2: External rear monitor connected to AUX

OUT2 of the optional expansion box (VPE-
S431).

Press g or f to select the desired
source.

To return to the SETUP screen, select
RETURN and press -/J/SEARCH or g.
To finish the setting, press and hold MUTE
for at least 2 seconds.

MUTE

-/J/SEARCH

Continued