ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
134
P2000MAN.DOC 19/10/99 17:59
15.8.4 Clear Programmer, Release Fixture and DeLatch Fixtures
These three functions work on the Programmer in different ways.
Clear Programmer clears the contents of the Programmer removing any
changes you have made and not saved. It has the same function as the
Clear button on the desk.
Release fixture or Untouch is similar to Clear Programmer, but it clears
from the programmer ONLY Fixtures that are selected. Consider it a
selective clear function.
DeLatch Fixture removes control of a Fixture from the Tablet, but leaves
any changes in the programmer ready to be recorded.
changes you have made and not saved. It has the same function as the
Clear button on the desk.
Release fixture or Untouch is similar to Clear Programmer, but it clears
from the programmer ONLY Fixtures that are selected. Consider it a
selective clear function.
DeLatch Fixture removes control of a Fixture from the Tablet, but leaves
any changes in the programmer ready to be recorded.
15.8.5 OFF
This function turns any selected Attributes OFF in the Programmer.
•
Select Fixtures you wish to work with.
•
Select the Attribute you wish to turn OFF.
•
Click on OFF.
15.9 Other functions on the Tablet
15.9.1 Programming a GROUP on the Tablet
•
Select the required Fixtures.
•
Click on Record Group in the ML function area.
•
Click on a Group button to store the group on this button.
15.9.2 To use a Tablet GROUP
•
Click on the appropriate Group button.
Once recorded it is a good idea to note which Fixtures are within a group, either on a
separate sheet of paper or on the Tablet template.
separate sheet of paper or on the Tablet template.
15.9.3 Record Memory
This is used to record a Memory exactly like the Memory button on the desk.
•
Set up the scene you wish to record.
•
Click on the Record Memory button
. The Memory LED on the desk will light up.
•
Press a Playback SWOP button on the desk to record the Memory.
15.9.4 Record Step
This is used to record a step when creating a Chase.
You must first open up Chase recording on the desk by pressing the CHASE
button, and select the Playback Channel the Chase will be recorded on.
button, and select the Playback Channel the Chase will be recorded on.
Clicking on Record Step then mimics the pressing of the flashing Playback
SWOP button to record the steps.
SWOP button to record the steps.
You must then close the Chase again by pressing the CHASE button on the
desk again.
desk again.