ASUS mypal a600 User Manual
Avolites Pearl 2000 Operators Manual - page
136
P2000MAN.DOC 19/10/99 17:59
15.12 Future functions of the Graphics Tablet
15.12.1 Set Stage Height
This function will not be available until a later software release.
•
When available clicking on this button, followed by clicking on a position
on the Fader will allow the tracking stage height to be set.
•
Until this feature is available, if you wish to track Fixtures at head height
they should be trained at this height, by for instance using a mic stand to
train them.
train them.
15.12.2 The Screen 1, Screen 2 and Stage buttons and Mouse Pad on the Tablet
These buttons are for future development.
15.13 Using the Puck
The Puck is an alternative input device to the Stylus. Use whichever you
prefer. Hold down the big button to click the puck.
prefer. Hold down the big button to click the puck.
15.14 Tablet Specifications
Full 3 dimensional tracking system for Moving Lights (Moving Head or
Moving Mirror)
Moving Mirror)
Colour control system for instant creation of new colours
Fixture selects
Focus selects
Group selects
Individual access to every Attribute
Fully scaled stage layout with nudge or absolute position
Full focus creation, recall and edit, with safe way of only storing pan and tilt.
Fast step through of Fixtures within a Focus
Fast step through of Focuses
Locate Fixture button, turns on the Fixture at a given position
15.15 Help and Hints
Problem : Pan and Tilt do not work in the Stage area of the Graphics Tablet.
Solution 1 : Either train the desk for Tracking, or turn the Tracking OFF in
the ML menu.
Solution 2 : An old Personality File has been used to patch the Instrument.
Solution 1 : Either train the desk for Tracking, or turn the Tracking OFF in
the ML menu.
Solution 2 : An old Personality File has been used to patch the Instrument.
Problem : The Colour Mix area has little or no effect on the colour output
from a Fixture
Solution : Check that the Graphics Tablet is working correctly by clicking on
CLEAR then re-selecting the Fixtures with the Tablet. Watch the Preset
SWOP LED’s on the desk to ensure that it is mirroring the Tablet (assuming
you are set to Fixtures not Mimics). If this is working properly set the
Luminosity bar to 50% and try again. Make sure your Fixtures have a Colour
Mix facility, not just Colour Wheels.
from a Fixture
Solution : Check that the Graphics Tablet is working correctly by clicking on
CLEAR then re-selecting the Fixtures with the Tablet. Watch the Preset
SWOP LED’s on the desk to ensure that it is mirroring the Tablet (assuming
you are set to Fixtures not Mimics). If this is working properly set the
Luminosity bar to 50% and try again. Make sure your Fixtures have a Colour
Mix facility, not just Colour Wheels.