ASUS mypal a600 User Manual

Avolites Pearl 2000 Operators Manual - page

 23

   P2000MAN.DOC  19/10/99 17:59

The Preset Fader on which you have patched a Dimmer Channel is called its
Handle.

Once patched Handles are immediately active and so can be used to bring
up Channels straight away to check your patch.

•

 Make sure all the Master Faders are at full.

•

 Select the appropriate Page of Fixtures.

•

 Raise and lower the Preset Faders.

The channel will output to the level of the Preset Fader.

You can use Fixtures from any pages to build your Memories and Chases. If
the channel you want to control is on the same Preset Fader but a different
page to another channel you are using, you will need to :

⇒

 To change the value of a Channel on a different Page of Fixtures, it is

•

 Turn the Key to Program. 

•

 Press CLEAR to empty the Programmer. (See Section 1.6 The

Programmer for more details.)

•

 Make sure all the Master Faders are at full and all the Playback Faders

are at zero.

•

 Create the scene you wish to record by selecting the appropriate Pages

of Fixtures and raising Preset Faders. See section 2.3.2 Controlling
Dimmers on Different Pages if required.

•

 Turn the Roller to the Facet you wish to record onto.

•

 Select Roller Page one, two or three. The Roller Page Buttons are

located to the left of the Roller.

•

 Press the blue MEMORY button on the Program Select bank.

 Its LED will

•

 Select the Page of Fixtures of the first channel you want to use.

•

 Raise the Preset Fader of the first channel. 

•

 Select the Page of Fixtures of the second channel.

•

 Bring the Preset Fader down to zero, then back up to the desired value

of the second channel.